View MC10110_787049.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Dual 3-Input/3-Ouput OR Gate
The MC10110 is designed to drive up to three transmission lines simul- taneously. The multiple outputs of this device also allow the wire "OR"-ing of several levels of gating for minimization of gate and package count. The ability to control three parallel lines from a single point makes the MC10110 particularly useful in clock distribution applications where minimum clock skew is desired. Three VCC pins are provided and each one should be used.
MC10110
L SUFFIX CERAMIC PACKAGE CASE 620-10
PD = 80 mW typ/pkg (No Load) tpd = 2.4 ns typ (All Outputs Loaded) tr, tf = 2.2 ns typ (20%-80%)
P SUFFIX PLASTIC PACKAGE CASE 648-08
LOGIC DIAGRAM
5 6 7
DIP PIN ASSIGNMENT
2 3 4 12 13 14
VCC1 AOUT AOUT AOUT AIN
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC2 VCC1 BOUT BOUT BOUT BIN BIN BIN
9 10 11
VCC1 = PIN 1, 15 VCC2 = PIN 16 VEE = PIN 8
AIN AIN VEE
Pin assignment is for Dual-in-Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 6-36 of the Motorola MECL Data Book (DL122/D).
9/96
(c) Motorola, Inc. 1996
3-40
REV 6
MC10110
ELECTRICAL CHARACTERISTICS
Test Limits Pin Pi Under Test 8 5, 6, 7 5, 6, 7 2 3 4 2 3 4 2 3 4 2 3 4 0.5 -1.060 -1.060 -1.060 -1.890 -1.890 -1.890 -1.080 -1.080 -1.080 -1.655 -1.655 -1.655 -0.890 -0.890 -0.890 -1.675 -1.675 -1.675 -30C Min Max 42 680 0.5 -0.960 -0.960 -0.960 -1.850 -1.850 -1.850 -0.980 -0.980 -0.980 -1.630 -1.630 -1.630 -0.810 -0.810 -0.810 -1.650 -1.650 -1.650 Min +25C Typ 30 Max 38 425 0.3 -0.890 -0.890 -0.890 -1.825 -1.825 -1.825 -0.910 -0.910 -0.910 -1.595 -1.595 -1.595 -0.700 -0.700 -0.700 -1.615 -1.615 -1.615 Min +85C Max 42 425 Unit mAdc Adc Adc Vdc
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH IinL
Output Voltage
Logic 1
VOH
Output Voltage
Logic 0
VOL
Vdc
Threshold Voltage
Logic 1
VOHA
Vdc
Threshold Voltage
Logic 0
VOLA
Vdc
Switching Times Propagation Delay
(50 Load) t5+2+ t5-2- t5+3+ t5-3- t5+4+ t5-4- t2+ t3+ t4+ t2- t3- t4- 2 2 3 3 4 4 2 3 4 2 3 4 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.0 1.0 1.0 1.0 1.0 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 1.4 1.4 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 1.1 1.1 2.4 2.4 2.4 2.4 2.4 2.4 2.2 2.2 2.2 2.2 2.2 2.2 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 1.5 1.5 1.5 1.5 1.5 1.5 1.2 1.2 1.2 1.2 1.2 1.2 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
ns
Rise Time
(20 to 80%)
Fall Time
(20 to 80%)
MECL Data DL122 -- Rev 6
3-41
MOTOROLA
MC10110
ELECTRICAL CHARACTERISTICS (continued)
TEST VOLTAGE VALUES (Volts) @ Test Temperature -30C +25C +85C Pin Under Test 8 5, 6, 7 5, 6, 7 2 3 4 2 3 4 2 3 4 2 3 4 Pulse In t5+2+ t5-2- t5+3+ t5-3- t5+4+ t5-4- (20 to 80%) t2+ t3+ t4+ t2- t3- t4- 2 2 3 3 4 4 2 3 4 2 3 4 5 5 5 5 5 5 5 5 5 5 5 5 5 6 7 5 6 7 Pulse Out 2 2 3 3 4 4 2 3 4 2 3 4 5 6 7 * * VIHmax -0.890 -0.810 -0.700 VILmin -1.890 -1.850 -1.825 VIHAmin -1.205 -1.105 -1.035 VILAmax -1.500 -1.475 -1.440 VEE -5.2 -5.2 -5.2
TEST VOLTAGE APPLIED TO PINS LISTED BELOW VIHmax VILmin VIHAmin VILAmax VEE 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 -3.2 V 8 8 8 8 8 8 8 8 8 8 8 8 (VCC) Gnd 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 +2.0 V 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16 1, 15, 16
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH IinL
Output Voltage
Logic 1
VOH
Output Voltage
Logic 0
VOL
Threshold Voltage
Logic 1
VOHA
Threshold Voltage
Logic 0
VOLA
Switching Times Propagation Delay
(50 Load)
Rise Time
Fall Time
(20 to 80%)
* Individually test each input using the pin connections shown. Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained. Outputs are terminated through a 50-ohm resistor to -2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the same manner.
MOTOROLA
3-42
MECL Data DL122 -- Rev 6
MC10110
OUTLINE DIMENSIONS
L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE V
9
-A-
16
-B-
1 8
C
L
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. DIM A B C D E F G H K L M N INCHES MIN MAX 0.750 0.785 0.240 0.295 --- 0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --- 5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01
-T-
SEATING PLANE
N E F D G
16 PL
K M J
16 PL
0.25 (0.010)
M
M
TB
S
0.25 (0.010)
TA
S
-A-
16 9
P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R
B
1 8
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01
F S
C
L
-T- H G D
16 PL
SEATING PLANE
K
J TA
M
M
0.25 (0.010)
M
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
MECL Data DL122 -- Rev 6 3-43
*MC10110/D*
MC10110/D MOTOROLA

▲Up To Search▲

Price & Availability of MC10110

	To Download MC10110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .